[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Fri Apr 12 10:45:53 UTC 2024
[ 0.000000] Machine model: FriendlyElec NanoPi R5C
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@0': base 0x0000000000000000, size 0 MiB
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@0': base 0x0000000000000000, size 0 MiB
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000010000000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff]
[ 0.000000] node 0: [mem 0x00000001f0000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 26 pages/cpu s68536 r8192 d29768 u106496
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656
[ 0.000000] Kernel command line: console=ttyFIQ0,1500000n8 earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=0a746ef1-a4b5-417e-bede-019acb00c93c ro rootfstype=squashfs rootwait rootfs_partition=3 rootfs_volume=3 earlyprintk panic=15 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory coherent_pool=1m
[ 0.000000] Unknown kernel command line parameters "earlyprintk rootfs_partition=3 rootfs_volume=3 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
[ 0.000000] Memory: 3988292K/4175872K available (15552K kernel code, 3338K rwdata, 6032K rodata, 6144K init, 567K bss, 179388K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 60789 entries in 238 pages
[ 0.000000] ftrace: allocated 238 pages with 6 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 320 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[ 0.000000] ITS [mem 0xfd440000-0xfd45ffff]
[ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @2400000 (indirect, esz 8, psz 64K, shr 0)
[ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @2410000 (flat, esz 2, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000002420000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000002430000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002839] Console: colour dummy device 80x25
[ 0.003349] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.004351] pid_max: default: 32768 minimum: 301
[ 0.005060] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.005806] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.008127] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.010301] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.011010] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.012024] rcu: Hierarchical SRCU implementation.
[ 0.012498] rcu: Max phase no-delay instances is 1000.
[ 0.014360] Platform MSI: interrupt-controller@fd440000 domain created
[ 0.015648] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[ 0.017768] smp: Bringing up secondary CPUs ...
[ 0.019418] Detected VIPT I-cache on CPU1
[ 0.019549] cacheinfo: Unable to detect cache hierarchy for CPU 1
[ 0.019571] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[ 0.019604] GICv3: CPU1: using allocated LPI pending table @0x0000000002440000
[ 0.019679] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.021095] Detected VIPT I-cache on CPU2
[ 0.021217] cacheinfo: Unable to detect cache hierarchy for CPU 2
[ 0.021239] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[ 0.021268] GICv3: CPU2: using allocated LPI pending table @0x0000000002450000
[ 0.021327] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.022638] Detected VIPT I-cache on CPU3
[ 0.022753] cacheinfo: Unable to detect cache hierarchy for CPU 3
[ 0.022773] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[ 0.022803] GICv3: CPU3: using allocated LPI pending table @0x0000000002460000
[ 0.022859] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.023036] smp: Brought up 1 node, 4 CPUs
[ 0.032396] SMP: Total of 4 processors activated.
[ 0.032858] CPU features: detected: 32-bit EL0 Support
[ 0.033358] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.034187] CPU features: detected: Common not Private translations
[ 0.034813] CPU features: detected: CRC32 instructions
[ 0.035318] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.035874] CPU features: detected: Privileged Access Never
[ 0.036413] CPU features: detected: RAS Extension Support
[ 0.036940] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.037760] CPU: All CPU(s) started at EL2
[ 0.038201] alternatives: applying system-wide alternatives
[ 0.040658] devtmpfs: initialized
[ 0.086396] Registered cp15_barrier emulation handler
[ 0.086922] Registered setend emulation handler
[ 0.087705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.088708] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.089844] pinctrl core: initialized pinctrl subsystem
[ 0.092249] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.095505] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.096828] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.098170] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.103975] Registered FIQ tty driver
[ 0.105108] thermal_sys: Registered thermal governor 'fair_share'
[ 0.105123] thermal_sys: Registered thermal governor 'step_wise'
[ 0.105718] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.106422] cpuidle: using governor menu
[ 0.108188] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.109101] ASID allocator initialised with 65536 entries
[ 0.113623] ramoops: dmesg-0 0x20000@0x0000000000110000
[ 0.115463] ramoops: console 0x80000@0x0000000000130000
[ 0.116021] ramoops: pmsg 0x50000@0x00000000001b0000
[ 0.117244] printk: console [ramoops-1] enabled
[ 0.117697] pstore: Registered ramoops as persistent store backend
[ 0.118332] ramoops: using 0xf0000@0x110000, ecc: 0
[ 0.149400] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /vop@fe040000/ports/port@0/endpoint@3
[ 0.188628] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
[ 0.190348] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
[ 0.191932] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
[ 0.193676] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
[ 0.195245] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
[ 0.196165] rockchip-pinctrl pinctrl: probed pinctrl
[ 0.234123] cryptd: max_cpu_qlen set to 1000
[ 0.237680] fiq_debugger fiq_debugger.0: error -ENXIO: IRQ fiq not found
[ 0.238391] fiq_debugger fiq_debugger.0: error -ENXIO: IRQ wakeup not found
[ 0.239113] fiq_debugger_probe: could not install nmi irq handler
[ [ 0.239857] printk: console [ttyFIQ0] enabled
0.239857] printk: console [ttyFIQ0] enabled
[ 0.240683] printk: bootconsole [uart8250] disabled
[ 0.240683] printk: bootconsole [uart8250] disabled
[ 0.241535] Registered fiq debugger ttyFIQ0
[ 0.247923] iommu: Default domain type: Translated
[ 0.247960] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.248594] SCSI subsystem initialized
[ 0.249036] usbcore: registered new interface driver usbfs
[ 0.249196] usbcore: registered new interface driver hub
[ 0.249288] usbcore: registered new device driver usb
[ 0.249562] mc: Linux media interface: v0.10
[ 0.249664] videodev: Linux video capture interface: v2.00
[ 0.249865] pps_core: LinuxPPS API ver. 1 registered
[ 0.249889] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.249932] PTP clock support registered
[ 0.250434] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
[ 0.250707] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 0.250809] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:3)
[ 0.250841] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 0.252710] Advanced Linux Sound Architecture Driver Initialized.
[ 0.253676] Bluetooth: Core ver 2.22
[ 0.253753] NET: Registered PF_BLUETOOTH protocol family
[ 0.253778] Bluetooth: HCI device and connection manager initialized
[ 0.253808] Bluetooth: HCI socket layer initialized
[ 0.253836] Bluetooth: L2CAP socket layer initialized
[ 0.253889] Bluetooth: SCO socket layer initialized
[ 1.090219] clocksource: Switched to clocksource arch_sys_counter
[ 1.110849] NET: Registered PF_INET protocol family
[ 1.111305] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.116896] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.117064] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.117203] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.117521] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes, linear)
[ 1.119805] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.120112] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
[ 1.120452] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
[ 1.121061] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.121974] RPC: Registered named UNIX socket transport module.
[ 1.122010] RPC: Registered udp transport module.
[ 1.122027] RPC: Registered tcp transport module.
[ 1.122043] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.123751] PCI: CLS 0 bytes, default 64
[ 1.127286] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[ 1.214875] Initialise system trusted keyrings
[ 1.215305] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.227260] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.228721] NFS: Registering the id_resolver key type
[ 1.228804] Key type id_resolver registered
[ 1.228827] Key type id_legacy registered
[ 1.228901] ntfs: driver 2.1.32 [Flags: R/O].
[ 1.229214] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 1.229941] fuse: init (API version 7.37)
[ 1.230675] SGI XFS with security attributes, no debug enabled
[ 1.287070] NET: Registered PF_ALG protocol family
[ 1.287136] Key type asymmetric registered
[ 1.287159] Asymmetric key parser 'x509' registered
[ 1.287280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 1.287310] io scheduler mq-deadline registered
[ 1.287332] io scheduler kyber registered
[ 1.305251] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap
[ 1.309944] rk-pcie 3c0000000.pcie: invalid prsnt-gpios property in node
[ 1.310084] rk-pcie 3c0000000.pcie: no vpcie3v3 regulator found
[ 1.310822] rk-pcie 3c0400000.pcie: invalid prsnt-gpios property in node
[ 1.310941] rk-pcie 3c0400000.pcie: no vpcie3v3 regulator found
[ 1.311306] rk-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
[ 1.311403] rk-pcie 3c0000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[ 1.311454] rk-pcie 3c0000000.pcie: MEM 0x00f4200000..0x00f5ffffff -> 0x00f4200000
[ 1.311519] rk-pcie 3c0000000.pcie: MEM 0x0300000000..0x033fffffff -> 0x0300000000
[ 1.311636] rk-pcie 3c0000000.pcie: iATU unroll: enabled
[ 1.311661] rk-pcie 3c0000000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G
[ 1.312026] mpp_service mpp-srv: unknown mpp version for missing VCS info
[ 1.312060] mpp_service mpp-srv: probe start
[ 1.312352] rk-pcie 3c0800000.pcie: invalid prsnt-gpios property in node
[ 1.312453] rk-pcie 3c0800000.pcie: no vpcie3v3 regulator found
[ 1.317434] mpp_service mpp-srv: probe success
[ 1.320286] snps pcie3phy FW update! size 8192
[ 1.325879] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.325943] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.330086] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.330136] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 1.330636] rockchip-pvtm fde00000.pvtm: failed to retrieve pvtm_tz
[ 1.330731] rockchip-pvtm fde00000.pvtm: pvtm@0 probed
[ 1.330926] rockchip-pvtm fde80000.pvtm: failed to retrieve pvtm_tz
[ 1.331017] rockchip-pvtm fde80000.pvtm: pvtm@1 probed
[ 1.331187] rockchip-pvtm fde90000.pvtm: failed to retrieve pvtm_tz
[ 1.331276] rockchip-pvtm fde90000.pvtm: pvtm@2 probed
[ 1.331979] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 1.333045] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[ 1.333512] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 1.334935] rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
[ 1.335066] rk-pcie 3c0400000.pcie: host bridge /pcie@fe270000 ranges:
[ 1.335093] rk-pcie 3c0800000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[ 1.335203] rk-pcie 3c0800000.pcie: MEM 0x00f0200000..0x00f1ffffff -> 0x00f0200000
[ 1.335219] rk-pcie 3c0400000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[ 1.335259] rk-pcie 3c0800000.pcie: MEM 0x0380000000..0x03bfffffff -> 0x0380000000
[ 1.335310] rk-pcie 3c0400000.pcie: MEM 0x00f2200000..0x00f3ffffff -> 0x00f2200000
[ 1.335385] rk-pcie 3c0400000.pcie: MEM 0x0340000000..0x037fffffff -> 0x0340000000
[ 1.335395] rk-pcie 3c0800000.pcie: iATU unroll: enabled
[ 1.335407] rk-pcie 3c0800000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G
[ 1.335538] rk-pcie 3c0400000.pcie: iATU unroll: enabled
[ 1.335562] rk-pcie 3c0400000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G
[ 1.337788] random: crng init done
[ 1.347058] rockchip-vop2 fe040000.vop: Adding to iommu group 7
[ 1.363412] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0xf, primary plane phy id: 2
[ 1.363500] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x30, primary plane phy id: 4
[ 1.363581] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[ 1.363864] rockchip-vop2 fe040000.vop: [drm:vop2_bind] Esmart1-win0 as cursor plane for vp0
[ 1.364121] rockchip-vop2 fe040000.vop: [drm:vop2_bind] VP2 plane_mask is zero, so ignore register crtc
[ 1.365532] rockchip-vop2 fe040000.vop: bin=0
[ 1.365660] rockchip-vop2 fe040000.vop: Failed to get leakage
[ 1.365836] rockchip-vop2 fe040000.vop: Failed to get reg
[ 1.366010] rockchip-vop2 fe040000.vop: error -ENODEV: _opp_set_regulators: no regulator (vop) found
[ 1.366090] rockchip-vop2 fe040000.vop: failed to set opp config
[ 1.366117] rockchip-vop2 fe040000.vop: failed to init opp info
[ 1.366138] rockchip-vop2 fe040000.vop: failed to init_opp_table
[ 1.366169] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffffc0090303c8)
[ 1.366757] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.367846] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.368203] dwhdmi-rockchip fe0a0000.hdmi: error -ENXIO: IRQ index 1 not found
[ 1.368957] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffffc009043e90)
[ 1.369829] rockchip-drm display-subsystem: failed to parse loader memory
[ 1.371354] [drm] Initialized rockchip 4.0.0 20140818 for display-subsystem on minor 0
[ 1.371598] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 1.371917] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 1.372536] no ATF memory for init
[ 1.379981] SPI driver panel-simple-spi has no spi_device_id for simple-panel-spi
[ 1.382751] input: hdmi_cec_key as /devices/platform/fe0a0000.hdmi/dw-hdmi-cec.1.auto/input/input0
[ 1.384504] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.385869] brd: module loaded
[ 1.395398] loop: module loaded
[ 1.396309] zram: Added device: zram0
[ 1.396834] lkdtm: No crash points registered, enable through debugfs
[ 1.399554] SPI driver spidev has no spi_device_id for rockchip,spidev
[ 1.403412] PPP generic driver version 2.4.2
[ 1.404166] PPP MPPE Compression module registered
[ 1.404210] NET: Registered PF_PPPOX protocol family
[ 1.404620] usbcore: registered new interface driver cdc_ether
[ 1.425752] phy phy-fe8b0000.usb2-phy.3: illegal mode
[ 1.426963] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 1.427398] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1
[ 1.427626] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000800002010010
[ 1.427740] xhci-hcd xhci-hcd.4.auto: irq 48, io mem 0xfcc00000
[ 1.427904] ehci-platform fd800000.usb: EHCI Host Controller
[ 1.427936] phy phy-fe8b0000.usb2-phy.3: illegal mode
[ 1.427974] ohci-platform fd840000.usb: Generic Platform OHCI controller
[ 1.428028] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 1.428240] ehci-platform fd880000.usb: EHCI Host Controller
[ 1.428280] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 2
[ 1.428323] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[ 1.428472] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[ 1.428523] ehci-platform fd800000.usb: irq 50, io mem 0xfd800000
[ 1.428559] ohci-platform fd840000.usb: irq 52, io mem 0xfd840000
[ 1.428575] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 5
[ 1.428653] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 4
[ 1.428696] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[ 1.428775] ehci-platform fd880000.usb: irq 51, io mem 0xfd880000
[ 1.429010] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 6
[ 1.429077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.429112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.429137] usb usb1: Product: xHCI Host Controller
[ 1.429157] usb usb1: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 xhci-hcd
[ 1.429178] usb usb1: SerialNumber: xhci-hcd.4.auto
[ 1.429238] ohci-platform fd8c0000.usb: irq 53, io mem 0xfd8c0000
[ 1.430046] hub 1-0:1.0: USB hub found
[ 1.430139] hub 1-0:1.0: 1 port detected
[ 1.431000] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.431312] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.431348] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.431375] usb usb4: Product: xHCI Host Controller
[ 1.431396] usb usb4: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 xhci-hcd
[ 1.431418] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 1.432279] hub 4-0:1.0: USB hub found
[ 1.432366] hub 4-0:1.0: 1 port detected
[ 1.433358] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 1.433776] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7
[ 1.434000] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000800002010010
[ 1.434121] xhci-hcd xhci-hcd.5.auto: irq 49, io mem 0xfd000000
[ 1.434426] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 1.434740] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8
[ 1.434785] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[ 1.435148] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.435182] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.435208] usb usb7: Product: xHCI Host Controller
[ 1.435230] usb usb7: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 xhci-hcd
[ 1.435254] usb usb7: SerialNumber: xhci-hcd.5.auto
[ 1.436069] hub 7-0:1.0: USB hub found
[ 1.436170] hub 7-0:1.0: 1 port detected
[ 1.436996] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.437286] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.437321] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.437349] usb usb8: Product: xHCI Host Controller
[ 1.437372] usb usb8: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 xhci-hcd
[ 1.437395] usb usb8: SerialNumber: xhci-hcd.5.auto
[ 1.438205] hub 8-0:1.0: USB hub found
[ 1.438302] hub 8-0:1.0: 1 port detected
[ 1.439197] usbcore: registered new interface driver cdc_acm
[ 1.439227] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.439645] usbcore: registered new interface driver uas
[ 1.439843] usbcore: registered new interface driver usb-storage
[ 1.440025] usbcore: registered new interface driver usbserial_generic
[ 1.440086] usbserial: USB Serial support registered for generic
[ 1.440178] usbcore: registered new interface driver ftdi_sio
[ 1.440278] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.440278] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[ 1.440555] usbcore: registered new interface driver keyspan
[ 1.440615] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 1.440670] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 1.440723] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 1.440777] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 1.440872] usbcore: registered new interface driver oti6858
[ 1.440931] usbserial: USB Serial support registered for oti6858
[ 1.441010] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.441031] usbcore: registered new interface driver qcserial
[ 1.441045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441060] usb usb2: Product: EHCI Host Controller
[ 1.441070] usb usb2: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 ehci_hcd
[ 1.441080] usb usb2: SerialNumber: fd800000.usb
[ 1.441134] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.442087] hub 2-0:1.0: USB hub found
[ 1.442228] hub 2-0:1.0: 1 port detected
[ 1.444397] i2c_dev: i2c /dev entries driver
[ 1.447106] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[ 1.449989] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_rst
[ 1.450049] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_pwrdn
[ 1.450096] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_slp
[ 1.451565] rk808 0-0020: chip id: 0x8090
[ 1.451657] rk808 0-0020: No cache defaults, reading back from HW
[ 1.453601] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[ 1.454260] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.454297] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.454324] usb usb5: Product: EHCI Host Controller
[ 1.454345] usb usb5: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 ehci_hcd
[ 1.454366] usb usb5: SerialNumber: fd880000.usb
[ 1.455325] hub 5-0:1.0: USB hub found
[ 1.455446] hub 5-0:1.0: 1 port detected
[ 1.458007] rk808 0-0020: source: on=0x40, off=0x00
[ 1.458054] rk808 0-0020: support dcdc3 fb mode:-22, 167032496
[ 1.458084] rk808 0-0020: support pmic reset mode:0,0
[ 1.463593] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.463677] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.480840] rk817-battery: Failed to locate of_node [id: -1]
[ 1.481082] rk817-battery rk817-battery: Failed to find matching dt id
[ 1.481285] rk817-charger: Failed to locate of_node [id: -1]
[ 1.481461] rk817-charger rk817-charger: Failed to find matching dt id
[ 1.483191] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1
[ 1.486743] rk808-rtc rk808-rtc: registered as rtc0
[ 1.487385] rk808-rtc rk808-rtc: setting system clock to 2024-05-16T05:59:54 UTC (1715839194)
[ 1.487968] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 1.488008] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.488035] usb usb3: Product: Generic Platform OHCI controller
[ 1.488056] usb usb3: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 ohci_hcd
[ 1.488077] usb usb3: SerialNumber: fd840000.usb
[ 1.489583] hub 3-0:1.0: USB hub found
[ 1.489696] hub 3-0:1.0: 1 port detected
[ 1.491249] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 1.491301] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.491325] usb usb6: Product: Generic Platform OHCI controller
[ 1.491347] usb usb6: Manufacturer: Linux 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0 ohci_hcd
[ 1.491367] usb usb6: SerialNumber: fd8c0000.usb
[ 1.492514] hub 6-0:1.0: USB hub found
[ 1.492645] hub 6-0:1.0: 1 port detected
[ 1.497884] rtc_hym8563 5-0051: registered as rtc1
[ 1.500856] usbcore: registered new interface driver uvcvideo
[ 1.504065] Bluetooth: HCI UART driver ver 2.3
[ 1.504118] Bluetooth: HCI UART protocol H4 registered
[ 1.504140] Bluetooth: HCI UART protocol ATH3K registered
[ 1.504276] usbcore: registered new interface driver bfusb
[ 1.504939] cpu cpu0: Failed to get specification_serial_number
[ 1.505002] cpu cpu0: Failed to get leakage
[ 1.505843] cpu cpu0: soc version=0, speed=0
[ 1.508630] cpu cpu0: avs=0
[ 1.508958] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=1416000000 h_limit=0 h_table=0
[ 1.510734] cpu cpu0: EM: created perf domain
[ 1.512225] sdhci: Secure Digital Host Controller Interface driver
[ 1.512266] sdhci: Copyright(c) Pierre Ossman
[ 1.512296] Synopsys Designware Multimedia Card Interface Driver
[ 1.513189] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.514570] dwmmc_rockchip fe2b0000.mmc: No normal pinctrl state
[ 1.514618] dwmmc_rockchip fe2b0000.mmc: No idle pinctrl state
[ 1.515387] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
[ 1.515596] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
[ 1.515621] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
[ 1.515702] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 83,32 bit host data width,256 deep fifo
[ 1.517556] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.517630] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 1.517724] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.518044] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.518473] rk-crypto fe380000.crypto: invalid resource
[ 1.519594] rk-crypto fe380000.crypto: CRYPTO V2.0.0.0 Accelerator successfully registered
[ 1.519960] hid: raw HID events driver (C) Jiri Kosina
[ 1.520524] usbcore: registered new interface driver usbhid
[ 1.520545] usbhid: USB HID core driver
[ 1.521152] rockchip,bus bus-npu: bin=0
[ 1.521191] rockchip,bus bus-npu: Failed to get leakage
[ 1.522532] rockchip,bus bus-npu: avs=0
[ 1.526325] optee: probing for conduit method.
[ 1.526381] optee: revision 3.6 (0b06ae94)
[ 1.526940] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[ 1.526950] optee: initialized driver
[ 1.528028] usbcore: registered new interface driver snd-usb-audio
[ 1.530295] rk817-codec rk817-codec: DMA mask not set
[ 1.536380] NET: Registered PF_LLC protocol family
[ 1.536434] u32 classifier
[ 1.536445] input device check on
[ 1.536452] Actions configured
[ 1.536541] Initializing XFRM netlink socket
[ 1.536982] NET: Registered PF_INET6 protocol family
[ 1.537895] Segment Routing with IPv6
[ 1.537940] In-situ OAM (IOAM) with IPv6
[ 1.538006] NET: Registered PF_PACKET protocol family
[ 1.538029] NET: Registered PF_KEY protocol family
[ 1.538090] Bridge firewalling registered
[ 1.538230] Bluetooth: RFCOMM socket layer initialized
[ 1.538276] Bluetooth: RFCOMM ver 1.11
[ 1.538296] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.538314] Bluetooth: HIDP socket layer initialized
[ 1.538385] l2tp_core: L2TP core driver, V2.0
[ 1.538405] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.538417] l2tp_netlink: L2TP netlink interface
[ 1.538457] 8021q: 802.1Q VLAN Support v1.8
[ 1.538489] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.538501] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.539188] Key type dns_resolver registered
[ 1.540370] Loading compiled-in X.509 certificates
[ 1.542694] pstore: Using crash dump compression: deflate
[ 1.543679] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.546922] mmc0: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
[ 1.556099] rga2: Driver loaded successfully ver:3.2.63318
[ 1.556533] rga2: Module initialized.
[ 1.570336] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.592886] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu
[ 1.593156] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec
[ 1.593394] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd
[ 1.593610] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8
[ 1.593843] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3
[ 1.593949] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8
[ 1.594074] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3
[ 1.594597] mpp_rkvenc fdf40000.rkvenc: Adding to iommu group 5
[ 1.594896] mpp_rkvenc fdf40000.rkvenc: probing start
[ 1.595537] mpp_rkvenc fdf40000.rkvenc: bin=0
[ 1.595580] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage
[ 1.595753] debugfs: Directory 'fdf40000.rkvenc-venc' with parent 'vdd_logic' already present!
[ 1.596097] mpp_rkvenc fdf40000.rkvenc: avs=0
[ 1.596369] mpp_rkvenc fdf40000.rkvenc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 1.596924] rk-pcie 3c0800000.pcie: PCIe Link up, LTSSM is 0x130011
[ 1.596923] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.596940] rk-pcie 3c0800000.pcie: PCIe Gen.2 x1 link up
[ 1.597073] mpp_rkvenc fdf40000.rkvenc: probing finish
[ 1.597147] rk-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20
[ 1.597174] pci_bus 0002:20: root bus resource [bus 20-2f]
[ 1.597195] pci_bus 0002:20: root bus resource [io 0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff])
[ 1.597211] pci_bus 0002:20: root bus resource [mem 0xf0200000-0xf1ffffff]
[ 1.597227] pci_bus 0002:20: root bus resource [mem 0x380000000-0x3bfffffff]
[ 1.597279] pci 0002:20:00.0: [1d87:3566] type 01 class 0x060400
[ 1.597310] pci 0002:20:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]
[ 1.597332] pci 0002:20:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]
[ 1.597351] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 1.597435] pci 0002:20:00.0: supports D1 D2
[ 1.597451] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[ 1.597551] mpp_vdpu2 fdea0400.vdpu: Adding to iommu group 1
[ 1.598262] mpp_vdpu2 fdea0400.vdpu: probe device
[ 1.600303] rk-pcie 3c0400000.pcie: PCIe Link up, LTSSM is 0x130011
[ 1.600387] rk-pcie 3c0400000.pcie: PCIe Gen.2 x1 link up
[ 1.602391] rk-pcie 3c0400000.pcie: PCI host bridge to bus 0001:10
[ 1.602442] pci_bus 0001:10: root bus resource [bus 10-1f]
[ 1.602466] pci_bus 0001:10: root bus resource [io 0x200000-0x2fffff] (bus address [0xf2100000-0xf21fffff])
[ 1.602484] pci_bus 0001:10: root bus resource [mem 0xf2200000-0xf3ffffff]
[ 1.602500] pci_bus 0001:10: root bus resource [mem 0x340000000-0x37fffffff]
[ 1.603408] pci 0001:10:00.0: [1d87:3566] type 01 class 0x060400
[ 1.603459] pci 0001:10:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 1.604734] pci 0001:10:00.0: supports D1 D2
[ 1.604776] pci 0001:10:00.0: PME# supported from D0 D1 D3hot
[ 1.608940] pci 0002:20:00.0: Primary bus is hard wired to 0
[ 1.608987] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 1.611146] pci 0002:21:00.0: [10ec:8125] type 00 class 0x020000
[ 1.611258] pci 0002:21:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.611355] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 1.611419] pci 0002:21:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 1.611896] pci 0002:21:00.0: supports D1 D2
[ 1.611919] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.613172] mpp_vdpu2 fdea0400.vdpu: probing finish
[ 1.617772] mpp_vepu2 fdee0000.vepu: Adding to iommu group 3
[ 1.618627] mpp_vepu2 fdee0000.vepu: probing start
[ 1.621052] pci 0001:10:00.0: Primary bus is hard wired to 0
[ 1.621095] pci 0001:10:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 1.621611] mpp_vepu2 fdee0000.vepu: probing finish
[ 1.622196] mpp-iep2 fdef0000.iep: Adding to iommu group 4
[ 1.622455] mpp-iep2 fdef0000.iep: probe device
[ 1.622827] mpp-iep2 fdef0000.iep: allocate roi buffer failed
[ 1.623104] mpp-iep2 fdef0000.iep: probing finish
[ 1.623593] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.623606] mpp_jpgdec fded0000.jpegd: Adding to iommu group 2
[ 1.623848] mpp_jpgdec fded0000.jpegd: probe device
[ 1.624506] mpp_jpgdec fded0000.jpegd: probing finish
[ 1.625013] mpp_rkvdec2 fdf80200.rkvdec: Adding to iommu group 6
[ 1.625390] mpp_rkvdec2 fdf80200.rkvdec: rkvdec, probing start
[ 1.625835] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[ 1.625855] rkvdec2_init:1197: No niu aclk reset resource define
[ 1.625872] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[ 1.625884] rkvdec2_init:1200: No niu hclk reset resource define
[ 1.626192] mpp_rkvdec2 fdf80200.rkvdec: bin=0
[ 1.626237] mpp_rkvdec2 fdf80200.rkvdec: Failed to get leakage
[ 1.626412] debugfs: Directory 'fdf80200.rkvdec-vdec' with parent 'vdd_logic' already present!
[ 1.626745] mpp_rkvdec2 fdf80200.rkvdec: avs=0
[ 1.627003] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[ 1.627061] pci 0002:20:00.0: BAR 0: no space for [mem size 0x40000000]
[ 1.627081] pci 0002:20:00.0: BAR 0: failed to assign [mem size 0x40000000]
[ 1.627101] pci 0002:20:00.0: BAR 1: no space for [mem size 0x40000000]
[ 1.627117] pci 0002:20:00.0: BAR 1: failed to assign [mem size 0x40000000]
[ 1.627127] pci 0001:11:00.0: [10ec:8125] type 00 class 0x020000
[ 1.627133] pci 0002:20:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff]
[ 1.627143] pci 0002:20:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref]
[ 1.627153] pci 0002:20:00.0: BAR 7: assigned [io 0x100000-0x100fff]
[ 1.627179] pci 0002:21:00.0: BAR 2: assigned [mem 0xf0200000-0xf020ffff 64bit]
[ 1.627246] pci 0001:11:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.627260] pci 0002:21:00.0: BAR 4: assigned [mem 0xf0210000-0xf0213fff 64bit]
[ 1.627346] mpp_rkvdec2 fdf80200.rkvdec: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 1.627349] pci 0002:21:00.0: BAR 0: assigned [io 0x100000-0x1000ff]
[ 1.627373] pci 0001:11:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 1.627386] pci 0002:20:00.0: PCI bridge to [bus 21]
[ 1.627406] pci 0002:20:00.0: bridge window [io 0x100000-0x100fff]
[ 1.627433] pci 0002:20:00.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.627438] pci 0001:11:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 1.627561] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
[ 1.627583] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
[ 1.627598] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
[ 1.627611] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
[ 1.627877] mpp_rkvdec2 fdf80200.rkvdec: min_width 512
[ 1.627883] pci 0001:11:00.0: supports D1 D2
[ 1.627901] pci 0001:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.627974] mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish
[ 1.628082] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[ 1.628100] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[ 1.629444] mali fde60000.gpu: Kernel DDK version g21p0-01eac0
[ 1.629715] mali fde60000.gpu: GPU metrics tracepoint support enabled
[ 1.630292] mali fde60000.gpu: Failed to get specification_serial_number
[ 1.630344] mali fde60000.gpu: Failed to get leakage
[ 1.630964] debugfs: File 'Capture' in directory 'dapm' already present!
[ 1.631105] mali fde60000.gpu: soc version=0, speed=0
[ 1.631238] debugfs: Directory 'fde60000.gpu-mali' with parent 'vdd_gpu' already present!
[ 1.631647] pcieport 0002:20:00.0: PME: Signaling with IRQ 103
[ 1.632106] mali fde60000.gpu: avs=0
[ 1.632145] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 144; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[ 1.632252] pcieport 0002:20:00.0: AER: enabled with IRQ 104
[ 1.632477] mali fde60000.gpu: Register LUT 00070200 initialized for GPU arch 0x00070400
[ 1.632527] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[ 1.632772] mali fde60000.gpu: No priority control manager is configured
[ 1.632794] mali fde60000.gpu: Large page support was disabled at compile-time!
[ 1.632956] mali fde60000.gpu: No memory group manager is configured
[ 1.634916] mali fde60000.gpu: l=0 h=2147483647 hyst=5000 l_limit=700000000 h_limit=0 h_table=0
[ 1.635530] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[ 1.635635] mali fde60000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[ 1.635664] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[ 1.636021] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[ 1.636333] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[ 1.636633] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[ 1.637031] pci_bus 0001:11: busn_res: [bus 11-1f] end is updated to 11
[ 1.637127] pci 0001:10:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
[ 1.637151] pci 0001:10:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
[ 1.637173] pci 0001:10:00.0: BAR 7: assigned [io 0x200000-0x200fff]
[ 1.637202] pci 0001:11:00.0: BAR 2: assigned [mem 0xf2200000-0xf220ffff 64bit]
[ 1.637265] pci 0001:11:00.0: BAR 4: assigned [mem 0xf2210000-0xf2213fff 64bit]
[ 1.637321] pci 0001:11:00.0: BAR 0: assigned [io 0x200000-0x2000ff]
[ 1.637354] pci 0001:10:00.0: PCI bridge to [bus 11]
[ 1.637372] pci 0001:10:00.0: bridge window [io 0x200000-0x200fff]
[ 1.637389] pci 0001:10:00.0: bridge window [mem 0xf2200000-0xf22fffff]
[ 1.640134] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.640809] mali fde60000.gpu: Using configured power model mali-g52_r1-power-model, and fallback mali-simple-power-model
[ 1.641790] mmc0: Host Software Queue enabled
[ 1.641843] mmc0: new HS200 MMC card at address 0001
[ 1.641991] mali fde60000.gpu: * MALI kbase_mmap_min_addr compiled to CONFIG_DEFAULT_MMAP_MIN_ADDR, no runtime update possible! *
[ 1.642013] pcieport 0001:10:00.0: PME: Signaling with IRQ 115
[ 1.642017] mali fde60000.gpu: Probed as mali0
[ 1.642630] mmcblk0: mmc0:0001 A3A551 28.9 GiB
[ 1.642664] pcieport 0001:10:00.0: AER: enabled with IRQ 116
[ 1.643271] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.644367] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 1.644910] rockchip-suspend not set sleep-mode-config for mem-lite
[ 1.644926] rockchip-suspend not set wakeup-config for mem-lite
[ 1.644938] rockchip-suspend not set sleep-mode-config for mem-ultra
[ 1.644947] rockchip-suspend not set wakeup-config for mem-ultra
[ 1.645838] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 407; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '10:45:53', on 'Apr 12 2024'.
[ 1.646271] Mali:
[ 1.646278] Mali device driver loaded
[ 1.646300] ALSA device list:
[ 1.646310] #0: rockchip,hdmi0
[ 1.646589] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.646614] cfg80211: failed to load regulatory.db
[ 1.646925] mmcblk0: p1 p2 p3 p4 p5 p6
[ 1.648347] mmcblk0boot0: mmc0:0001 A3A551 4.00 MiB
[ 1.649863] mmcblk0boot1: mmc0:0001 A3A551 4.00 MiB
[ 1.650377] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.651335] mmcblk0rpmb: mmc0:0001 A3A551 16.0 MiB, chardev (237:0)
[ 1.653174] VFS: Mounted root (squashfs filesystem) readonly on device 179:3.
[ 1.654044] devtmpfs: mounted
[ 1.660651] Freeing unused kernel memory: 6144K
[ 1.673652] Run /sbin/init as init process
[ 1.676914] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.703670] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.730239] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.756911] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 1.778334] init: Console is alive
[ 1.779026] init: - watchdog -
[ 2.085835] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.090710] r8125: loading out-of-tree module taints kernel.
[ 2.092181] r8125 2.5Gigabit Ethernet driver 9.010.01-NAPI loaded
[ 2.092311] r8125 0002:21:00.0: enabling device (0000 -> 0003)
[ 2.112803] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 2.114857] r8125 Copyright (C) 2022 Realtek NIC software team <nicfae@realtek.com>
[ 2.114857] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 2.114857] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 2.115067] r8125 2.5Gigabit Ethernet driver 9.010.01-NAPI loaded
[ 2.115146] r8125 0001:11:00.0: enabling device (0000 -> 0003)
[ 2.135574] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 2.137616] r8125 Copyright (C) 2022 Realtek NIC software team <nicfae@realtek.com>
[ 2.137616] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 2.137616] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 2.138890] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.145405] init: - preinit -
[ 2.763922] r8125 0002:21:00.0 eth2: renamed from eth0
[ 2.804250] r8125 0001:11:00.0 eth3: renamed from eth1
[ 2.860339] r8125 0002:21:00.0 eth0: renamed from eth2
[ 2.912897] r8125 0001:11:00.0 eth1: renamed from eth3
[ 2.969074] eth1: 0xffffffc00b4d0000, aa:e6:07:53:79:3f, IRQ 152
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 4.197020] rk-pcie 3c0000000.pcie: PCIe Link Fail, LTSSM is 0x3, hw_retries=0
[ 5.307774] SWUPDATE: Idblock version fe07abc05b388eaf106cff71f6b88c9f
[ 5.336765] SWUPDATE: U-Boot version 2017.09-gitAUTOINC+4695fbcfba_642a85dd55-tano13
[ 5.347837] SWUPDATE: U-Boot startup version 1.0.0-tano2.rk0
[ 5.357290] SWUPDATE: Kernel version 6.1.57-tano-rk-standard-gea9e2a9344-tano0.2.1.20.1.0
[ 5.364073] SWUPDATE: Read-only filesystem version 2024-05-16-02-14-54-UTC
[ 5.483397] mount_root: /dev/mmcblk0p1: p1, rw, start 8388608, size 8388608
[ 5.485473] mount_root: /dev/mmcblk0p2: p2, rw, start 16777216, size 67108864
[ 5.485746] mount_root: /dev/mmcblk0p3: p3, rw, start 83886080, size 4294967296 [rootfs]
[ 5.487616] mount_root: /dev/mmcblk0p4: p4, rw, start 4378853376, size 67108864
[ 5.488402] mount_root: /dev/mmcblk0p5: p5, rw, start 4445962240, size 4294967296
[ 5.490346] mount_root: /dev/mmcblk0p6: p6, rw, start 8740929536, size 22295871488 [overlay]
[ 5.490486] mount_root: root filesystem on the /dev/mmcblk0p3 partition of /dev/mmcblk0 (rw) device
[ 5.496944] mount_root: founded suitable overlay partition /dev/mmcblk0p6
[ 5.499433] mount_root: loading kmods from internal overlay
[ 5.593498] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 5.604607] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 5.659630] EXT4-fs (mmcblk0p6): recovery complete
[ 5.659830] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 5.660103] block: attempting to load /tmp/ext4_cfg/upper/etc/config/fstab
[ 5.662399] block: extroot: not configured
[ 5.663745] EXT4-fs (mmcblk0p6): unmounting filesystem.
[ 5.673586] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 5.711565] block: attempting to load /tmp/ext4_cfg/upper/etc/config/fstab
[ 5.713489] block: extroot: not configured
[ 5.716504] mount_root: switching to ext4 overlay
[ 5.722300] overlayfs: "xino" feature enabled using 32 upper inode bits.
[ 5.786959] Root filesystem mounted
[ 5.801506] r8125: eth1: link up
[ 5.801674] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 6.107074] urandom-seed: Seeding with /etc/urandom.seed
[ 6.191150] procd: - watchdog -
[ 6.197865] procd: - ubus -
[ 6.259727] procd: - init -
Please press Enter to activate this console.
[ 6.543683] rk_pcie_establish_link: 132 callbacks suppressed
[ 6.543727] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.570352] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.596966] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.623731] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.650300] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.677071] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.703722] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.730295] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.756943] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.787003] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3
[ 7.690738] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.700805] tun: Universal TUN/TAP device driver, 1.6
[ 7.723615] usbcore: registered new interface driver cdc_ncm
[ 7.724795] usbcore: registered new interface driver cdc_wdm
[ 7.726106] cryptodev: driver 1.12 loaded.
[ 7.727445] gre: GRE over IPv4 demultiplexor driver
[ 7.735045] PPTP driver version 0.8.5
[ 7.737358] usbcore: registered new interface driver qmi_wwan
[ 7.748157] xt_time: kernel timezone is +0300
[ 7.749087] usbcore: registered new interface driver cdc_mbim
[ 7.765140] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 8.113699] rk-pcie 3c0000000.pcie: PCIe Link Fail, LTSSM is 0x3, hw_retries=1
[ 9.127069] rk-pcie 3c0000000.pcie: failed to initialize host
[ 10.495875] Cgroup memory moving (move_charge_at_immigrate) is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
[ 11.784762] udevd[1297]: starting version 3.2.10
[ 11.818641] udevd[1297]: starting eudev-3.2.10
[ 17.767631] platform fe710000.tsadc: deferred probe pending
[ 39.633199] eth1: 0xffffffc00b4d0000, ce:f7:e1:3c:be:3b, IRQ 152
[ 39.803951] br-lan: port 1(eth1) entered blocking state
[ 39.804001] br-lan: port 1(eth1) entered disabled state
[ 39.804349] device eth1 entered promiscuous mode
[ 39.925238] eth0: 0xffffffc00b410000, ce:f7:e1:3c:be:3a, IRQ 117
[ 42.581469] r8125: eth1: link up
[ 42.581571] br-lan: port 1(eth1) entered blocking state
[ 42.581586] br-lan: port 1(eth1) entered forwarding state
[ 42.581791] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
tanowrt login: root
Password:
_______ __ __ _
|__ __| \ \ / / | | Embedded Linux Distribution
| | __ _ _ __ __\ \ /\ / / __| |_ by Tano Systems
| |/ _` | '_ \ / _ \ \/ \/ / '__| __|
| | (_| | | | | (_) \ /\ /| | | |_ (c) 2018-2024 Tano Systems LLC
|_|\__,_|_| |_|\___/ \/ \/ |_| \__| https://tano-systems.com
Board: FriendlyElec NanoPi R5C (eMMC)
Release: Kirkstone
Revision: ae61265cc065ec17f043ec5aee37906b0105e710
2024-05-16 02:14:54 UTC
[root@tanowrt ~]#